40kHz Ultrasonic Bath Cleaner for Laboratory

Brand Name GT SONIC
Model Number GT SONIC-P6
MOQ 1pc
Price negotiable
Packaging Details standard packing : PE Foam + Carton Packing
Payment Terms L/C, T/T
GT SONIC P6 6L Ultrasonic Cleaner Applications
Laboratory Glassware and Accessories

Laboratory Glassware and Accessories

Sample preparation and routine laboratory work often leave deposits inside glass containers, measuring accessories and reusable tools. The P6 ultrasonic bath for laboratory use helps remove residual particles from narrow openings and recessed surfaces that are difficult to reach with manual washing.

Residue removal
Dental Instrument Pre-Cleaning

Dental Instrument Pre-Cleaning

Reusable dental instruments with hinges, serrated surfaces and narrow joints can retain debris after clinical procedures. The P6 can serve as an ultrasonic instrument cleaner during the pre-cleaning stage, helping dislodge contamination before subsequent disinfection or sterilization.

Pre-sterilization cleaning
Precision Machined Components

Precision Machined Components

Metalworking processes can leave cutting fluids, fine metal particles and machining residues on screws, fittings and small precision components. Ultrasonic cleaning helps reach threaded sections, blind holes and detailed surfaces before inspection or assembly.

Pre-inspection cleaning
Optical Equipment Maintenance

Optical Equipment Maintenance

Optical workshops and instrument repair facilities often handle removable metal frames, fittings and mechanical accessories that accumulate dust, polishing residue or handling contamination. A 40kHz cleaning bath can assist with cleaning intricate joints and small cavities without extensive manual brushing.

Detailed joint cleaning
Jewelry Repair and Finishing

Jewelry Repair and Finishing

During jewelry repair and finishing, polishing compounds and fine debris can collect around clasps, engraved surfaces and decorative details. The P6 can be used for suitable metal jewelry and removable accessories requiring cleaning after workshop operations.

Compound residue removal
Small-Parts Maintenance Workstations

Small-Parts Maintenance Workstations

Equipment maintenance teams frequently clean small batches of fasteners, removable hardware and mechanical accessories during servicing. A compact benchtop cleaning unit allows these tasks to be handled near the work area without preparing a large industrial washing system.

Benchtop batch cleaning
GT SONIC P6 Ultrasonic Cleaner Performance & Features

40kHz Ultrasonic Cleaning System

The P6 operates at a fixed 40kHz ultrasonic frequency, producing cavitation in the cleaning liquid to help loosen contamination from accessible and recessed surfaces.

Cleaning Around Detailed Features

Ultrasonic action reaches narrow gaps, threads and joints that may be difficult to clean with brushes or wiping tools.

Consistent Frequency Configuration

The 40kHz system provides a defined operating frequency for routine cleaning procedures. Users can develop cleaning methods around the fixed-frequency configuration rather than switching between frequencies.

45-150W Adjustable Ultrasonic Power

Unlike fixed-output units, the P6 allows operators to regulate ultrasonic intensity within its specified power range.

30%-100% Output Adjustment

The adjustable output lets users select power levels for different cleaning tasks, from lighter deposits to contamination requiring more intensive ultrasonic action.

Flexible Process Settings

Power adjustments can be combined with changes in cleaning duration and solution selection. This flexibility is useful when a single workstation handles workpieces with different surface characteristics.

6L Seamless SUS304 Stainless Steel Tank

The P6 incorporates a stamped stainless steel tank designed for routine laboratory and professional cleaning applications.

Practical 6L Cleaning Space

With internal dimensions of 300 x 155 x 150mm, the tank provides room for small instruments and components while maintaining a relatively compact equipment footprint.

One-Piece Stamped Tank Construction

The tank is formed without welded seams in its stamped body, reducing potential leakage points. SUS304 stainless steel also offers corrosion resistance when used with suitable cleaning liquids.

300W Heating and Mechanical Timer

The integrated heating system allows the P6 to operate as a heated ultrasonic cleaner, while mechanical controls keep everyday operation straightforward.

20-80C Temperature Settings

The 300W heater provides temperature adjustment within the specified range, allowing operators to select conditions appropriate for the cleaning agent and workpiece.

0-30-Minute Timer and Protected Electronics

A mechanical timer enables straightforward cycle adjustment without digital menus; the moisture-resistant and corrosion-resistant PCB design provides additional protection. The P series also includes drainage and a cooling fan on 6L and larger models.

GT SONIC P6 Ultrasonic Cleaner Specifications
Tank Capacity
6L
Tank Material
SUS304 Stainless Steel
Tank Size
300 x 155 x 150mm
Overall Size
330 x 180 x 310mm
Ultrasonic Frequency
40kHz
Ultrasonic Power
45-150W
Power Adjustment
30%-100%
Heating Power
300W
Heating Temperature
20-80C
Timer
0-30 Minutes
Control Type
Mechanical Controls
Additional Features
Drainage and Cooling Fan
Model
Tank Size (mm)
Unit Size (mm)
Capacity (L)
Ultrasonic Power (W)
Frequency (kHz)
Heating Power (W)
Timer (min)
Heating Temp. (C)
P2
150 x 140 x 100
190 x 170 x 220
2
50
40
100
0-30
20-80
P3
240 x 140 x 100
270 x 170 x 240
3
30-100
40
100
0-30
20-80
P6
300 x 155 x 150
330 x 180 x 310
6
45-150
40
300
0-30
20-80
P9
300 x 240 x 150
330 x 270 x 310
9
60-200
40
300
0-30
20-80
P13
330 x 300 x 150
360 x 330 x 310
13
90-300
40
400
0-30
20-80
P20
500 x 300 x 150
550 x 330 x 310
20
120-400
40
500
0-30
20-80
P27
500 x 300 x 200
550 x 330 x 360
27
150-500
40
500
0-30
20-80

Note - The P6 is the 6 L model of the GT SONIC P series (45-150 W ultrasonic, 40 kHz, 300 W heating, 20-80C, 0-30 min mechanical timer, 30%-100% power adjustment). Series values follow the published P-series table; confirm the electrical configuration and supplied accessories for the ordered model.

How to Use the GT SONIC P6 6L Ultrasonic Cleaner
3-Step Use Guide

Three-Step Use Guide

1. Fill — Fill the 6L SUS304 tank to the appropriate level with water or a detergent approved for the workpiece, and keep the electrical body and controls dry.

2. Place and set — Place parts in the basket without crowding, then set the cleaning mode, temperature and time according to the material and residue.

3. Run and remove — Start the cycle; when it ends, lift out the parts, rinse if needed and dry them, then empty and wipe the tank after use.

What Can It Clean?

What Can It Clean?

Laboratory glassware Dental instruments Machined components Optical accessories Jewelry Small-parts hardware

Suitability depends on the material, coatings, adhesives and the detergent used; check compatibility before immersion.

What to Note?

Operation Tips

Check detergent compatibility with SUS304 and the workpiece Avoid overloading; leave space for liquid circulation Never pour flammable solvents into the heated tank Test heat and chemistry on less critical pieces first Confirm the 0-30 min timer is a setting range, not continuous duty Keep the electrical body and controls dry during filling
Get Best Price
Frequently Asked Questions About the GT SONIC P6 Ultrasonic Cleaner
Why choose a 6L laboratory ultrasonic bath instead of a smaller model?
expand

The P6 offers a 300 x 155 x 150mm tank, giving users more room for laboratory accessories and instruments than the smaller P2 and P3 models. This extra space may be useful when washing several suitable items together or accommodating components that cannot fit inside a compact tank. Buyers should check the actual item dimensions and required immersion depth before choosing a capacity.

What laboratory items should not be placed in the P6 ultrasonic bath?
expand

Items with delicate coatings, unstable bonded joints, fragile components or materials that may react adversely to ultrasonic cavitation should not be cleaned without confirming compatibility. Certain optical elements, electronic assemblies and sensitive instrument parts may require alternative cleaning methods. The P6 is intended for materials and components approved for ultrasonic immersion, and its stainless steel tank does not make every item safe to clean.

How do the P6 mechanical timer and adjustable power controls work?
expand

The P6 uses mechanical controls to set cleaning duration and operating conditions. Users can select a cycle of up to 30 minutes and adjust ultrasonic output between 45W and 150W, corresponding to its specified 30%-100% power range. This allows routine settings to be selected without navigating a digital control interface.

Can the P6 be used for dental instrument pre-cleaning?
expand

The P6 may be used for removing debris from suitable reusable dental instruments before their required disinfection or sterilization stages. Hinged instruments and tools with textured surfaces may benefit from ultrasonic pre-cleaning when the instrument manufacturer permits this method. Dental buyers should verify suitability for their reprocessing procedures and should not treat ultrasonic cleaning as sterilization.

Does the P6 have a drainage system and cooling fan?
expand

The published P-series information identifies drainage and cooling fan features on machines with capacities of 6L and above, which includes the P6. Drainage makes it more convenient to empty used cleaning liquid, while the fan supports cooling of internal equipment components. Buyers should confirm the specific drainage arrangement when ordering.

What is the difference between the GT SONIC P6, P9 and P13 models?
expand

The main differences are tank capacity, dimensions and available power. The P6 has a 6L tank and 45-150W ultrasonic output, while the P9 increases capacity to 9L with 60-200W output. The P13 offers 13L capacity and 90-300W ultrasonic power, together with 400W heating. The appropriate choice depends on the size and quantity of items being cleaned, as well as the required operating conditions.

Get a Quote for GT SONIC P6
Related Products
27L Power Adjustable Lab Ultrasonic Cleaner 40kHz

27L Power Adjustable Lab Ultrasonic Cleaner 40kHz

View Details
10L Laboratory Ultrasonic Bath for Low Noise Cleaning

10L Laboratory Ultrasonic Bath for Low Noise Cleaning

View Details
9L Degas Ultrasonic Bath for Laboratory Use

9L Degas Ultrasonic Bath for Laboratory Use

View Details
27L Laboratory Ultrasonic Cleaning Equipment 500W 40kHz

27L Laboratory Ultrasonic Cleaning Equipment 500W 40kHz

View Details
2L Lab Ultrasonic Cleaner with SUS304 Tank

2L Lab Ultrasonic Cleaner with SUS304 Tank

View Details
6L Lab Ultrasonic Cleaner with Drain Valve

6L Lab Ultrasonic Cleaner with Drain Valve

View Details
GT SONIC D9 Lab Ultrasonic Bath 9L 200W

GT SONIC D9 Lab Ultrasonic Bath 9L 200W

View Details
Household Lab Ultrasonic Cleaner VGT-6250 2.5 Liter Capacity 5 Cycles Timer

Household Lab Ultrasonic Cleaner VGT-6250 2.5 Liter Capacity 5 Cycles Timer

View Details
Contact Now