GT SONIC 288L Large Capacity Industrial Ultrasonic Bath for Endoscope Cleaning

Brand Name GT SONIC
Model Number GT SONIC-ST288
MOQ 1 pc
Price Negotiable
Packaging Details standard packing : PE Foam + Carton Packing
Payment Terms Western Union, T/T, D/P, D/A, L/C
GT SONIC ST Series 288L Ultrasonic Cleaner Applications
Flexible Endoscopes After Every Procedure

Flexible Endoscopes After Every Procedure

A 288L bath takes a full flexible endoscope laid in a coil, insertion tube and all, without the kinks that a small bench tank forces. Cavitation reaches the elevator channel, the air-water channel and the outside of the insertion tube at the same time, so biofilm and bioburden are lifted from both surfaces in one cycle.

Flexible Endoscopy
Rigid Endoscopes, Laparoscopes and Cystoscopes

Rigid Endoscopes, Laparoscopes and Cystoscopes

Telescopes, sheaths and obturators come back from the OR coated in blood and protein film. Fully submerged, the 28 kHz setting works the seams and the lens housing where a brush cannot follow, and the 40 kHz setting finishes the optical surfaces without dulling the sapphire window.

Rigid Endoscopy
Surgical Instruments, Forceps and Scissors

Surgical Instruments, Forceps and Scissors

Box locks, ratchets and the serrations of artery forceps are where soil survives manual washing. The heated bath opens the hinge, and the imploding bubbles scrub the joint without the abrasion that rounds off cutting edges, which keeps scissors sharp for longer.

Surgical Instruments
Bending Sections, Control Handles and Valves

Bending Sections, Control Handles and Valves

The bending section and the control body are the parts most often damaged by cleaning. Low power setting and 40 kHz give a gentle clean that lifts debris from the angulation wires and the valve seats without attacking the seals or the bonded rubber.

Delicate Assemblies
Dental, Ophthalmic and ENT Instrument Sets

Dental, Ophthalmic and ENT Instrument Sets

A full tray of mirrors, probes, curettes and specula fits in one load. The 288L volume means a whole clinic set is processed at once instead of in relays, and the timer plus thermostat give a repeatable cycle that staff can follow without judgement calls.

Clinic Instrument Sets
Baskets, Containers, Tubing and Accessories

Baskets, Containers, Tubing and Accessories

Transfer baskets, sterilisation containers, suction tubing and scope storage trays collect residue on every wire and seam. Immersed in the heated bath they come out with the protein film broken down, so the whole reprocessing chain starts from a clean container rather than a contaminated one.

Containers and Accessories
GT SONIC ST Series Ultrasonic Cleaner Performance & Features

3000W Cavitation Across a 288L Bath

Industrial transducer power spread over a large working volume, so a coiled endoscope or a full instrument tray cleans in every position rather than only above the transducer.

3000W Ultrasonic Output

The transducer array is sized for the 288L tank rather than scaled up from a bench unit, which keeps cavitation density usable at the far corners of the bath instead of fading away from the transducer plate.

0-100% Power Adjustment

Output is adjustable from 0 to 100 percent, so a delicate bending section can be run at reduced power while a heavily soiled instrument tray is run at full output in the same tank.

Sweep Frequency Generator

The generator sweeps around the nominal frequency instead of holding a fixed tone, which removes the standing-wave dead spots that leave untouched patches on long, thin items such as endoscope shafts.

Even Coverage at 288L

Bath depth and transducer layout are matched so that parts laid flat on the basket, hung vertically, or coiled in a tray all see comparable cavitation energy.

Dual Frequency 28 kHz and 40 kHz

One tank covers heavy soil removal and precision cleaning, which matters when the same department reprocesses both instrument trays and optical equipment.

28 kHz for Heavier Soil

Lower frequency produces larger, more energetic bubble collapse, which is what strips dried blood, protein and lubricant from instrument joints and the inside of sheaths.

40 kHz for Optical and Delicate Parts

Higher frequency gives a denser, gentler cavitation field that cleans lens housings, seals and fine lumens without eroding polished or bonded surfaces.

Frequency Suited at Build

The machine is configured for the mix of work in the department, and the frequency can be specified when ordering so the tank matches the instruments actually being reprocessed.

Full Immersion by Design

At 288L there is room to fully immerse long flexible scopes and complete trays, which is the condition ultrasonic cleaning needs to work on internal channels as well as outer surfaces.

7000W Heating and Timed Cycles

Protein and lipid soil softens with temperature, and a repeatable timer is what makes the cycle auditable in a clinical workflow.

7000W Immersion Heating

The 7 kW heater brings a 288L bath up to working temperature quickly and holds it there during a long shift, so the bath does not fall away when a cold instrument tray goes in.

30-100 C Thermostat

Temperature is set on a digital thermostat. Around 40 to 55 C is usual for protein soil on instruments, and higher settings help with lubricants and dried residue on containers.

0-60 Minute Timer or Untimed

A timed cycle covers routine reprocessing, and the untimed setting supports extended runs on heavily soiled industrial or container loads.

Stable Temperature Under Load

The heater rating is matched to the tank volume rather than the tank being heated by a small element, which keeps the set point steady when a full basket is loaded.

Stainless Build and Daily Handling

Construction and service access aimed at a department that runs the machine every day rather than occasionally.

2 mm SUS 304 Tank

The tank is formed from 2 mm 304 stainless, thick enough to resist the acid and alkaline detergents used in reprocessing and to hold its shape under a full 288L load.

Moisture-Proofed PCB and Industrial Transducers

The generator board is moisture-proofed and the transducers are industrial grade, which is what allows the machine to sit in a wet utility room and run repeated cycles without electronic faults.

Lid, Basket and Castors

A stainless lid limits evaporation and heat loss between cycles, a SUS 304 basket keeps instruments off the tank floor, and castors with locks let a 288L unit be moved and then parked safely.

CE, FCC, RoHS and PSE Certified

The machine is certified for European, US and Japanese export markets, with voltage and plug configuration matched to the destination before shipping.

GT SONIC ST Series Ultrasonic Cleaner Specifications
Machine Type
Large Capacity Industrial Ultrasonic Bath
Series
GT SONIC ST Series
Tank Capacity
288L
Tank Construction
SUS 304 stainless steel, 2 mm wall
Ultrasonic Power
3000W
Ultrasonic Power Control
0 - 100 percent adjustable
Ultrasonic Frequency
28 kHz or 40 kHz
Heating Power
7000W
Heating Temperature
30 - 100 C
Timer
0 - 60 min, untimed setting available
Generator
Separate enclosure, sweep frequency
Supplied With
Stainless lid and SUS 304 basket
Mobility
Castors with locking brakes (36L and above)
Certification
CE, FCC, RoHS, PSE
Warranty
1 year
Place of Origin
Guangdong, China
Market
Plug Standard
Voltage / Frequency
Ultrasonic Power
Heating Power
Status
North America
NEMA 6-20P
AC220-240V 60Hz
3000W
7000W
Built to order
Europe
CEE 7/7 Schuko
AC220-240V 50Hz
3000W
7000W
Standard
United Kingdom
BS 1363
AC230V 50Hz
3000W
7000W
Built to order
Japan
NEMA 6-20P
AC200V 50/60Hz
3000W
7000W
Built to order
Australia / NZ
AS/NZS 3112
AC240V 50Hz
3000W
7000W
Built to order

Specifications follow the current product page. The page lists 3000W ultrasonic power in the specification block while the description text still quotes 2400W, so confirm the generator rating with the factory before ordering. The ST range is built from small bench sizes up to this 288L unit, and tank dimensions, basket layout and fitting position are agreed on the order drawing because the bath is built for the parts being processed. Heating is quoted at 30-100 C with a 0-60 minute timer or untimed running.

How to Use the GT SONIC ST Series 288L Ultrasonic Cleaner
3-Step Use Guide

Three-Step Use Guide

1. Fill and heat — Fill the 288L SUS 304 tank to the marked level with water and the detergent suited to the instruments, confirm the heater is submerged, then set the thermostat and bring the bath to temperature.

2. Load and degas — Lay long scopes in a coil inside the basket, open every hinge and box lock, keep all items below the surface, and run a short degas cycle before the first load of the day.

3. Run and dry — Run the timed cycle at the power setting suited to the load, lift the basket out, rinse with purified water, then dry and lubricate joints before the instruments go to sterilisation.

What Can It Clean?

What Can It Clean?

Flexible endoscopes Rigid endoscopes Laparoscopes Cystoscopes Telescopes and sheaths Biopsy forceps Artery forceps Scissors Needle holders Retractors Dental mirrors Probes and curettes Specula Instrument trays Sterilisation containers Suction tubing

Follow the instrument manufacturer's reprocessing instructions. Heat-sensitive scopes, unsealed optics and bonded assemblies have temperature and power limits, so run them at reduced power and confirm the allowable temperature first.

What to Note?

Operation Tips

Pre-clean gross soil before the ultrasonic cycle Use a neutral or enzymatic detergent matched to the instruments Keep the bath between 40 and 55 C for protein soil Never let instruments touch the tank floor directly Open hinges and box locks so the bath reaches the joint Dry and lubricate joints immediately after the cycle
Get Best Price
Frequently Asked Questions About the GT SONIC ST Series Ultrasonic Cleaner
Can a full flexible endoscope really be cleaned in this bath?
expand

Yes, provided the scope is rated for immersion by its manufacturer and the channel ports are connected properly. A 288L tank gives the length and depth to lay a full insertion tube in a wide coil, so the whole shaft is submerged without tight bends. The ultrasonic stage still follows the standard reprocessing sequence: bedside flush, leak test, manual channel brushing, then ultrasonic cleaning, rinse and disinfection.

Why does the specification list 3000W when the description says 2400W?
expand

The specification block on the page gives 3000W for this 288L build, while the older description text was written around a smaller ST model and still quotes 2400W. Treat 3000W as the figure for this tank and confirm the generator rating on the order drawing, since ultrasonic power is matched to tank volume and to the parts being processed.

Which frequency should be used for endoscopes?
expand

Use 40 kHz for optical equipment, sealed lens assemblies and anything with bonded or polished surfaces, because the finer cavitation is gentler. Use 28 kHz for stainless instrument trays, forceps and containers where heavier soil and scale have to be removed. On a mixed load, clean optics separately at the higher frequency rather than compromising on one setting.

What temperature and detergent are suitable?
expand

A neutral or enzymatic detergent at 40 to 55 C covers most protein soil on surgical instruments. Avoid strongly alkaline baths on aluminium trays and on anodised parts, and avoid acidic baths on chrome-plated instruments. Always follow the detergent supplier's dilution and the instrument maker's temperature limit, and never run the heater with the tank below the marked level.

How often does a 288L bath need to be changed?
expand

Change the bath when it stops lifting soil, when it looks cloudy, or on the interval set by your infection-control procedure, whichever comes first. Large tanks hold their working temperature well but they also dilute soil more slowly than a small tank, so a daily visual check plus a documented change interval is more reliable than judging by appearance alone.

What is included and what is the lead time?
expand

The machine ships with a stainless lid and a SUS 304 basket, and units of 36L and above are fitted with locking castors. Certification is CE, FCC, RoHS and PSE. The tank is built to the order drawing, so basket layout, fittings and plug configuration are agreed before production; supply capacity is around 500 units per day across the range and lead time depends on the final specification.

Get a Quote for GT SONIC ST Series
Related Products
500 Watt Ultrasonic Cleaning Equipments Touch Key Cleaner Auto Parts 27L 40kHz

500 Watt Ultrasonic Cleaning Equipments Touch Key Cleaner Auto Parts 27L 40kHz

View Details
Digital Large Ultrasonic Cleaner 500W 27L Laboratory Usage VGT-2227QTD GT SONIC

Digital Large Ultrasonic Cleaner 500W 27L Laboratory Usage VGT-2227QTD GT SONIC

View Details
Touch Panel Ultrasound Washing Machines , SS Industrial Washer Large Capacity 9L

Touch Panel Ultrasound Washing Machines , SS Industrial Washer Large Capacity 9L

View Details
SUS304 Tank 36L Large Ultrasonic Cleaner 0-100% Power Adjustable Acid Proof

SUS304 Tank 36L Large Ultrasonic Cleaner 0-100% Power Adjustable Acid Proof

View Details
GT SONIC GTS-1036S 157L Ultrasonic Automotive Parts Cleaner with Oil Filter

GT SONIC GTS-1036S 157L Ultrasonic Automotive Parts Cleaner with Oil Filter

View Details
GT SONIC VGT-6250 2.5L Digital Ultrasonic Cleaner and Sterilizer for Dental and Medical Instruments

GT SONIC VGT-6250 2.5L Digital Ultrasonic Cleaner and Sterilizer for Dental and Medical Instruments

View Details
13 Litre Benchtop Large Industrial Ultrasonic Cleaner 28kHz 40kHz Acid Proof

13 Litre Benchtop Large Industrial Ultrasonic Cleaner 28kHz 40kHz Acid Proof

View Details
Contact Now