Double Power Heated Ultrasonic Parts Cleaner 3L Volume With 0-30 Mins Timer

Brand Name GT SONIC
Model Number GT SONIC T3
MOQ 1
Price Negotiable
Packaging Details PE Foam+ master carton
Payment Terms Western Union, MoneyGram, T/T
Where Can a 3L Ultrasonic Cleaner for Bike Parts Be Used?
Bicycle Drivetrain Hardware

Bicycle Drivetrain Hardware

Chainring bolts, metal spacers and detachable drivetrain fittings often collect old lubricant and road debris during regular riding. Once removed for servicing, these small components can be cleaned separately before inspection and reassembly. A compact ultrasonic bath is particularly useful for occasional bicycle maintenance where only a few parts require attention.

Lubricant and debris removal
Bicycle Brake and Control Fittings

Bicycle Brake and Control Fittings

Small metal fittings used in brake and control assemblies may retain dirt around threads and adjustment points. Cleaning suitable detached hardware can help technicians inspect these areas during servicing. Brake pads, friction surfaces, sealed mechanisms and hydraulic components require special attention, and their manufacturers’ maintenance instructions take priority.

Servicing support
Mechanical Measuring Tool Accessories

Mechanical Measuring Tool Accessories

Workshop measuring equipment can accumulate fine particles and handling residue around removable attachments. Dirt on contact surfaces may make inspection more difficult when the accessories are used repeatedly. For approved metal accessories, a small cleaning bath offers an alternative to intensive manual wiping; calibrated mechanisms stay outside the tank unless immersion is permitted.

Contact surface care
Electronic Equipment Repair Hardware

Electronic Equipment Repair Hardware

During electronic equipment servicing, technicians may remove small metal shields, mounting brackets and mechanical covers. These detached components can be cleaned before being returned to the assembly. The process is intended for compatible non-electrical hardware, while moisture-sensitive components and populated circuit boards require separate, approved cleaning methods.

Non-electrical hardware
Printing Equipment Components

Printing Equipment Components

Ink residue can build up around removable fittings and metal parts used in printing equipment. Depending on the ink formulation, ordinary rinsing may leave deposits in recessed surfaces. Ultrasonic treatment can form part of the maintenance process for suitable disassembled components, with the cleaning agent selected for the ink chemistry and part material.

Ink residue control
Small Repair Workshop Accessories

Small Repair Workshop Accessories

Service benches often accumulate small screws, threaded adapters, clips and detachable tool accessories awaiting maintenance. Cleaning these items in manageable groups helps keep the workstation organized. A 3L cleaning chamber suits modest workloads, and separate Normal and Soft operating modes provide an additional choice for different compatible components.

Mode-selectable cleaning
Key Features of the Double Power Ultrasonic Cleaner

Normal and Soft Ultrasonic Modes

A dedicated switch provides two operating intensities, selected according to the workpiece and cleaning procedure.

Normal Mode for Routine Cleaning

Normal Ultrasonic mode is intended for general ultrasonic treatment of compatible metal accessories and workshop components, providing the standard intensity for everyday maintenance tasks.

Soft Mode for Gentle Cleaning

Soft Ultrasonic mode provides an alternative when less intensive treatment is preferred. The original specifications do not provide a numerical power ratio between these modes, so cleaning trials remain important.

Compact 3L SUS304 Tank

The stainless steel chamber is designed around smaller maintenance tasks and appropriately sized detachable parts.

240 × 140 × 100mm Tank

The 100mm depth is an important consideration for taller components. Checking the complete workpiece dimensions, rather than tank volume alone, helps avoid selecting equipment that cannot accommodate the intended items.

SUS304 Construction

The tank uses SUS304 stainless steel. Its compatibility with cleaning chemicals depends on the detergent formulation, concentration and temperature.

100W Ultrasonic Output at 40kHz

A rated 100W output operates at a specified 40kHz frequency, generating cavitation in the cleaning liquid.

Cleaning of Recessed Surfaces

Threads, openings and narrow grooves may retain deposits after manual wiping. Ultrasonic action can reach these features wherever the cleaning liquid has adequate access.

Fixed-Frequency Operation

Normal and Soft refer to ultrasonic operating modes, not different frequencies. The specified frequency remains 40kHz, with a rated 100W ultrasonic output.

100W Heating and Mechanical Controls

Adjustable heating, timer and mode switch are arranged together on one accessible panel.

Adjustable Heating 20–80°C

A mechanical heater control and thermostat sensor support temperature adjustment within the stated range. Grease, lubricants and processing residues may respond differently to heated solutions, so detergent instructions and material compatibility determine the selected temperature.

0–30-Minute Timer and Mode Switch

Cleaning duration is selected through a mechanical timer, allowing short workshop procedures to be set without digital programming. Heating and timing are adjusted independently, while the Normal/Soft switch is positioned on the same panel.

GT SONIC T3 3L Ultrasonic Cleaner Specifications
Model
GT SONIC T3
Tank Capacity
3 L
Tank Material
SUS304 Stainless Steel
Tank Size
240 × 140 × 100 mm
Overall Size
270 × 170 × 240 mm
Ultrasonic Frequency
40 kHz
Ultrasonic Power
100 W
Ultrasonic Modes
Normal / Soft
Heating Power
100 W
Heating Temperature
20 – 80 °C
Timer
0 – 30 Minutes
Control Type
Mechanical Knobs and Mode Switch
Additional Design
Side Handles, Silicone-Padded Lid, Rear Power Switch
Model
Tank Size (mm)
Unit Size (mm)
Capacity (L)
Ultrasonic Power (W)
Frequency (kHz)
Heating Power (W)
Timer (min)
Heating Temp. (°C)
T2
150 × 140 × 100
190 × 170 × 220
2
50
40
100
0–30
20–80
T3
240 × 140 × 100
270 × 170 × 240
3
100
40
100
0–30
20–80
T6
300 × 155 × 150
330 × 180 × 310
6
150
40
300
0–30
20–80
T9
300 × 240 × 150
330 × 270 × 310
9
200
40
300
0–30
20–80
T13
330 × 300 × 150
360 × 330 × 310
13
300
40
400
0–30
20–80
T20
500 × 300 × 150
550 × 330 × 310
20
400
40
500
0–30
20–80
T27
500 × 300 × 200
550 × 330 × 360
27
500
40
500
0–30
20–80

Note — The original introduction mentions eight available T-series sizes, while the supplied specifications identify seven models; the series table retains the seven published entries.

How to Use the GT SONIC T3 3L Ultrasonic Parts Cleaner
3-Step Use Guide

Three-Step Use Guide

1. Fill — Fill the 3L SUS304 tank to the appropriate level with water or a detergent approved for the workpiece, and keep the electrical body and controls dry.

2. Place and set — Place parts in the basket without crowding, then set temperature (20–80°C), time (0–30 min) and choose Normal or Soft mode according to the material and residue.

3. Run and remove — Start the cycle; when it ends, lift out the parts, rinse if needed and dry them, then empty and wipe the tank after use.

What Can It Clean?

What Can It Clean?

Chainring bolts Metal spacers Brake fittings Tool accessories Small screws Threaded adapters

Suitability depends on the material, coatings, adhesives and the detergent used; check compatibility before immersion.

What to Note?

Operation Tips

Check detergent compatibility with SUS304 and the workpiece Keep calibrated mechanisms out of the tank unless approved Never pour flammable solvents into the heated tank Choose Soft mode for delicate or finish-sensitive parts Avoid overloading; leave space for liquid circulation Dry and relubricate drivetrain parts after cleaning
Get Best Price
Frequently Asked Questions About the 3L Heated Ultrasonic Cleaner
Can an ultrasonic cleaner for bike parts clean an entire bicycle chain?
expand

An entire bicycle chain may be difficult to arrange inside a 240 × 140 × 100mm tank without folding or overlapping the links, which can restrict liquid access and make cleaning less consistent. The chain manufacturer’s maintenance instructions should be checked before ultrasonic treatment, particularly regarding lubrication, drying and reassembly.

What is the difference between a double power ultrasonic cleaner and a dual-frequency cleaner?
expand

Double Power refers to the Normal and Soft ultrasonic modes provided on this machine, both operating within the specified 40kHz configuration. A dual-frequency cleaner offers two different ultrasonic frequencies, which is a separate feature. The presence of two operating modes should not be interpreted as 28/40kHz frequency switching.

What types of small components fit inside a 3L ultrasonic cleaning tank?
expand

Removable metal fittings, screws, brackets and suitably sized tool accessories are typical items worth evaluating. The tank measures 240 × 140 × 100mm, but usable space is reduced by the basket and required liquid clearance. Delicate coatings, seals and sensitive assemblies may require a different cleaning method regardless of whether they physically fit.

When is an ultrasonic cleaner with heater useful for workshop maintenance?
expand

A heated bath can help when an appropriate aqueous detergent works more effectively against lubricants and oily residue at a warmer temperature. The cleaning system has a 100W heater with a published range of 20–80°C. Heat-sensitive materials need lower temperatures or alternative methods, and flammable solvents must not be poured directly into the heated tank.

Should I choose a 2L, 3L or 6L ultrasonic cleaner for small parts?
expand

The main consideration is workpiece geometry. The 2L model has a 150mm-long tank, the 3L version extends the internal length to 240mm, and the 6L model increases the length to 300mm and depth to 150mm. If small parts fit comfortably in the 3L chamber, the larger size may be unnecessary; taller or longer components may justify moving up.

What should buyers check when purchasing a benchtop ultrasonic cleaner for repair work?
expand

Begin with the components customers intend to clean and the available bench space. Material compatibility, heating requirements and electrical supply are also relevant. When requesting a quotation, distributors can confirm the Normal/Soft operating modes, supplied accessories, certification documents and warranty terms with GT SONIC.

Get a Quote for GT SONIC T3
Related Products
New Condition Ultrasonic Parts Washer Lab Equipment GT SONIC 6L 40kHz 300 Watt

New Condition Ultrasonic Parts Washer Lab Equipment GT SONIC 6L 40kHz 300 Watt

View Details
Laboratory Ultrasonic Parts Cleaner Bath 9L 200W 40KHz Electric Fuel 1 Year Warranty

Laboratory Ultrasonic Parts Cleaner Bath 9L 200W 40KHz Electric Fuel 1 Year Warranty

View Details
40KHz 6L Digital Control Parts Ultrasonic Cleaner , Heated Ultrasonic Washer 150W

40KHz 6L Digital Control Parts Ultrasonic Cleaner , Heated Ultrasonic Washer 150W

View Details
Laboratory Ultrasonic Engine Cleaner ABS SUS304 Material 6L 45/65kHz Low Noise

Laboratory Ultrasonic Engine Cleaner ABS SUS304 Material 6L 45/65kHz Low Noise

View Details
Multi - Frequency Parts Ultrasonic Cleaner Heated Soak Tank 13L 28kHz/40KHz

Multi - Frequency Parts Ultrasonic Cleaner Heated Soak Tank 13L 28kHz/40KHz

View Details
6L Heating Manual Ultrasonic Cleaner Power Adjustable 40kHz 150W 0-30 Mins Timer

6L Heating Manual Ultrasonic Cleaner Power Adjustable 40kHz 150W 0-30 Mins Timer

View Details
Titaninum Parts Ultrasonic Cleaner , GT SONIC S3 Ultrasonic Brass Cleaner 220v

Titaninum Parts Ultrasonic Cleaner , GT SONIC S3 Ultrasonic Brass Cleaner 220v

View Details
Contact Now