6L Heating Manual Ultrasonic Cleaner Power Adjustable 40kHz 150W 0-30 Mins Timer

Brand Name GT SONIC
Model Number GT SONIC-P6
MOQ 1 pc
Price Negotiable
Packaging Details standard packing : PE Foam + Carton Packing
Payment Terms Western Union, T/T, D/P, D/A, L/C
Where Can the GT SONIC P6 Manual Ultrasonic Cleaner Be Used?
Carburetor Parts Cleaning

Carburetor Parts Cleaning

A carburetor rebuild often involves removing jets, screws and small metal fittings before inspection. Old fuel deposits can remain around tiny openings even after the larger surfaces have been wiped clean. For compatible dismantled parts, the P6 serves as a compact cleaning bath during this preparation stage, with a suitable aqueous detergent and thorough post-cleaning inspection.

Fuel deposit removal
Fuel Injector Service Accessories

Fuel Injector Service Accessories

Injector servicing involves more than cleaning the injector itself. Removable metal fittings, retaining hardware and related accessories may need attention before the fuel system is reassembled. These components can be cleaned separately when their materials permit immersion. The P6 is a general ultrasonic bath and does not provide injector actuation or spray-pattern testing.

Removable fittings
Automotive Electrical Hardware

Automotive Electrical Hardware

Metal brackets, external housings and mounting hardware removed from automotive electrical equipment can collect dirt and oil during service. Cleaning these detached pieces makes the surfaces easier to inspect before reinstalling them. Populated circuit boards, moisture-sensitive connectors and complete electronic assemblies require their own approved cleaning procedures.

Detached parts only
Pneumatic Tool Maintenance

Pneumatic Tool Maintenance

Compressed-air tools rely on small fittings, threaded adapters and detachable metal accessories that encounter lubricants during operation. A short cleaning cycle can form part of routine tool maintenance, followed by drying, inspection and any lubrication required by the tool manufacturer. Internal mechanisms and seals should not be immersed without checking the servicing instructions.

Routine tool upkeep
Grinding and Polishing Accessories

Grinding and Polishing Accessories

Abrasive dust and polishing compound often settle inside drilled holes, threads and recessed areas of small metalwork. A 40kHz ultrasonic bath offers another cleaning method for compatible finished pieces, using a detergent chosen for the actual polishing compound that will not affect plating, coatings or the required surface finish.

Compound residue removal
Small-Parts Repair Workbenches

Small-Parts Repair Workbenches

Repair benches regularly accumulate assorted screws, washers and removable fittings awaiting inspection or reuse. Keeping a separate cleaning station nearby helps organize this work without mixing contaminated hardware with cleaned components. The 6L capacity is intended for modest cleaning loads rather than larger assemblies.

Benchtop batch cleaning
Key Features of the GT SONIC P6 Adjustable Power Ultrasonic Cleaner

Adjustable Ultrasonic Output

A 40kHz ultrasonic system with 30%–100% variable output lets operators establish appropriate conditions for different workpieces.

30%–100% Power Adjustment

The control provides adjustment across the specified range, while the P6 series table identifies ultrasonic power from 45W to 150W. Lower settings can be evaluated for lightly contaminated or finish-sensitive parts, while higher output suits robust metal components with persistent deposits.

Direct Output Control

Power can be changed from the mechanical panel before a cleaning cycle. Once a suitable setting has been established, similar parts can be processed using the same operating approach.

Seamless SUS304 Tank

The cleaning chamber uses stamped SUS304 stainless steel, with no welded seams in the formed tank body.

300 × 155 × 150mm Internal Space

Its dimensions make the machine more appropriate for small fittings and detachable hardware than complete automotive assemblies. Actual workpiece clearance depends on the basket and the required liquid level.

Stamped Tank Construction

The formed tank reduces potential leakage points associated with welded joints. Detergent compatibility remains important, particularly when using concentrated or chemically aggressive cleaning solutions.

300W Heating & Mechanical Controls

Integrated heating and mechanical timer controls support defined, repeatable cleaning procedures.

20–80°C Temperature Settings

The integrated 300W heater provides temperature adjustment within the stated range, subject to the cleaning agent and workpiece requirements. Heating may help loosen grease and machining oil when used with the correct detergent.

0–30-Minute Mechanical Timer

The mechanical timer allows a defined cleaning interval to be selected for routine workshop tasks. Ultrasonic output, heating and cleaning duration are adjusted directly on three front-mounted rotary controls, without a digital interface.

Drainage & Equipment Protection

Routine tank emptying and internal cooling are practical considerations for a heated benchtop cleaner.

Drain Outlet

The P-series information identifies drainage on machines of 6L and above, allowing used solution to be emptied without tipping the unit.

Cooling and PCB Protection

The series features cooling equipment and a moisture-resistant, corrosion-resistant PCB design. Appropriate ventilation and operating conditions remain important during use.

GT SONIC P6 6L Ultrasonic Cleaning Machine Specifications
Model
GT SONIC P6
Tank Capacity
6 L
Tank Material
SUS304 Stainless Steel
Tank Size
300 × 155 × 150 mm
Overall Size
330 × 180 × 310 mm
Ultrasonic Frequency
40 kHz
Ultrasonic Power
45 – 150 W (P-Series Table)
Power Adjustment
30% – 100%
Heating Power
300 W
Heating Temperature
20 – 80 °C
Timer
0 – 30 Minutes
Control Type
Mechanical Rotary Controls
Additional Features
Drainage, Cooling Fan, Protected PCB
Model
Tank Size (mm)
Unit Size (mm)
Capacity (L)
Ultrasonic Power (W)
Frequency (kHz)
Heating Power (W)
Timer (min)
Heating Temp. (°C)
P2
150 × 140 × 100
190 × 170 × 220
2
50
40
100
0–30
20–80
P3
240 × 140 × 100
270 × 170 × 240
3
30–100
40
100
0–30
20–80
P6
300 × 155 × 150
330 × 180 × 310
6
45–150
40
300
0–30
20–80
P9
300 × 240 × 150
330 × 270 × 310
9
60–200
40
300
0–30
20–80
P13
330 × 300 × 150
360 × 330 × 310
13
60–300
40
400
0–30
20–80
P20
500 × 300 × 150
550 × 330 × 310
20
120–400
40
500
0–30
20–80
P27
500 × 300 × 200
550 × 330 × 360
27
150–500
40
500
0–30
20–80

Note — The same product page gives 200W under Detail Information and 150W in the product title, while the P-series table specifies 45–150W; these values are retained according to their respective source sections. Series values follow the published P-series table and are not combined with figures from other P-series pages.

How to Use the GT SONIC P6 6L Ultrasonic Parts Cleaner
3-Step Use Guide

Three-Step Use Guide

1. Fill — Fill the 6L SUS304 tank to the appropriate level with water or a detergent approved for the workpiece, and keep the electrical body and controls dry.

2. Place and set — Place parts in the basket without crowding, then set power (30%–100%), temperature (20–80°C) and time (0–30 min) according to the material and residue.

3. Run and remove — Start the cycle; when it ends, lift out the parts, rinse if needed and dry them, then empty the tank through the drain outlet and wipe it after use.

What Can It Clean?

What Can It Clean?

Carburetor parts Injector fittings Metal brackets Pneumatic tool parts Polished components Small hardware

Suitability depends on the material, coatings, adhesives and the detergent used; check compatibility before immersion.

What to Note?

Operation Tips

Check detergent compatibility with SUS304 and the workpiece Do not immerse populated circuit boards or sealed assemblies Never pour flammable solvents into the heated tank Avoid uninterrupted 30-minute cycles; allow cooling intervals Keep internal tool mechanisms dry unless instructions permit Keep ventilation clear around the cooling fan
Get Best Price
Frequently Asked Questions About the GT SONIC P6 Manual Ultrasonic Parts Cleaner
Can an ultrasonic fuel injector cleaning machine clean a complete injector?
expand

A general ultrasonic bath and a dedicated injector servicing system perform different functions. The P6 can be considered for compatible removable injector-related components, but it has no documented injector actuation, fuel-flow measurement or spray-pattern testing capability. Complete injectors should only be immersed when their service instructions specifically permit ultrasonic treatment.

Which automotive parts fit inside a 6L ultrasonic cleaner?
expand

The P6 tank measures 300 × 155 × 150mm internally. Small metal fittings, removable carburetor parts, brackets and selected mechanical hardware may fit, depending on their shape. Allow space for the basket and liquid circulation rather than filling the chamber completely; the P9 or a larger model may be more appropriate for wider components.

When is adjustable ultrasonic power useful for cleaning small metal parts?
expand

A lower setting may be appropriate for lightly contaminated or finish-sensitive components, while more persistent deposits on robust metal parts may justify higher output. The P6 has a specified 30%–100% adjustment range, and cleaning trials are the best way to establish settings that achieve the required result without unnecessary exposure.

Does a heated ultrasonic cleaner remove oil and grease without detergent?
expand

Heating water alone is not a reliable substitute for a properly selected cleaning agent. Oils and grease often require an aqueous ultrasonic detergent formulated for the workpiece material. The P6 heater operates within the published 20–80°C range, and flammable solvents must not be poured directly into the heated bath.

How long should ultrasonic parts cleaning take in a small workshop?
expand

Cleaning time depends on the contamination, liquid temperature, detergent and component geometry. The P6 provides a 0–30-minute timer. Its original product FAQ also advises against uninterrupted 30-minute operation for machines in the 2–27L range and recommends a cooling interval of at least 20 minutes.

What should buyers check when ordering a benchtop ultrasonic cleaner for automotive servicing?
expand

Start with the dimensions and materials of the largest component, then identify the type of residue to be removed and the number of items processed per batch. Electrical compatibility, required accessories and delivery arrangements also matter. If the intended work involves complete fuel injectors rather than detachable metal fittings, clarify whether a specialized cleaning and testing machine is required.

Get a Quote for GT SONIC P6
Related Products
New Condition Ultrasonic Parts Washer Lab Equipment GT SONIC 6L 40kHz 300 Watt

New Condition Ultrasonic Parts Washer Lab Equipment GT SONIC 6L 40kHz 300 Watt

View Details
Laboratory Ultrasonic Parts Cleaner Bath 9L 200W 40KHz Electric Fuel 1 Year Warranty

Laboratory Ultrasonic Parts Cleaner Bath 9L 200W 40KHz Electric Fuel 1 Year Warranty

View Details
40KHz 6L Digital Control Parts Ultrasonic Cleaner , Heated Ultrasonic Washer 150W

40KHz 6L Digital Control Parts Ultrasonic Cleaner , Heated Ultrasonic Washer 150W

View Details
Laboratory Ultrasonic Engine Cleaner ABS SUS304 Material 6L 45/65kHz Low Noise

Laboratory Ultrasonic Engine Cleaner ABS SUS304 Material 6L 45/65kHz Low Noise

View Details
Multi - Frequency Parts Ultrasonic Cleaner Heated Soak Tank 13L 28kHz/40KHz

Multi - Frequency Parts Ultrasonic Cleaner Heated Soak Tank 13L 28kHz/40KHz

View Details
Double Power Heated Ultrasonic Parts Cleaner 3L Volume With 0-30 Mins Timer

Double Power Heated Ultrasonic Parts Cleaner 3L Volume With 0-30 Mins Timer

View Details
Titaninum Parts Ultrasonic Cleaner , GT SONIC S3 Ultrasonic Brass Cleaner 220v

Titaninum Parts Ultrasonic Cleaner , GT SONIC S3 Ultrasonic Brass Cleaner 220v

View Details
Contact Now